Commercial HVAC Controls & Diagnostic Service Tools
ClimateMaster unit controllers run basic operation, advanced diagnostics, and connection to building management systems. Matched service tools give technicians a real-time interface to the heat pump, at the unit or from a phone.
Select a control or a tool below for its features and its manuals.
Controls and Service Tools
CXM2
Features
- Powerful entry-level control
- RS-485 port for communicating with communicating controls
- Single-stage compressor control
- Base control on all products except the Tranquility® (ST) Rooftop Series size 072 and smaller
DXM2.6
Features
- Controls Intelligent Constant Volume (CV) EC motors (required)
- RS-485 port for communicating with communicating controls
- Single- or two-stage compressor control
- Optional on all products except the Tranquility® (ST) Rooftop Series size 096 and larger
Refrigerant Detection System (RDS)
Features
- Monitors sensors that detect R-454B refrigerant, or enables external ventilation
- Includes an output relay with normally open and normally closed contacts for various uses
- Uses non-volatile flash memory to store configuration and operational information
- If the RDS detects refrigerant concentration above the maximum threshold, it enables the unit blower, disables the compressors, and enables the pilot relay on the RDS board
ClimaLink Edge
Features
- Enables integration into DDC systems and management through the Wireless Service Tool
- Supports BACnet Ethernet/IP or MS/TP communications
- Supports Modbus RTU or TCP communications for integration into Modbus DDC networks
- Integrates with any ClimateMaster commercial WSHP
MPC Multi-Protocol DDC
Features
- Allows for integration into DDC systems
- Supports BACnet MS/TP, Johnson Controls N2, and Modbus communication
- Integrates with any ClimateMaster commercial WSHP
- Optional on all products
Wireless Service Tool (WST)
Features
- Complete interface into the ClimateMaster water-source heat pump system from your own Wi-Fi device
- Shows the refrigerant circuit with real-time temperature, pressure, and airflow readings on the on-screen diagram
- Lets technicians configure products in the field, access performance data, and set up systems with ease
- Updates tool software remotely when connected to the internet
Advanced Refrigerant Control
Features
- Monitors refrigerant sensors and controls refrigerant valves
- Uses non-volatile flash memory to store configuration and operational information
- Includes multiple refrigerant sensor inputs, two stepper outputs to modulate refrigerant valves, and an output relay with normally open and normally closed contacts
Equipment Touch Service Tool (EQT)
Features
- Large color touchscreen for ease of use
- Interface to the ClimateMaster MPC (BACnet) building management controller
- Provides access to most internal control and status points, and to alarms
- Used by technicians for start-up and troubleshooting of building management controller systems
Additional Literature
- Auxiliary Electric Heater Interface Kit (ASKHTR) Install Manual
- ALCP 2004 Loop Control Panel Install Manual
- ATP32U03/04 Digital Night Setback and Pump Restart Install Manual
Legacy Controls
DXM
DXM2.5
Features
- Controls Intelligent Constant Volume (CV) EC motors (required)
- RS-485 port for communicating with communicating controls
- Single- or two-stage compressor control
- Optional on all products except the Tranquility® (ST) Rooftop Series size 096 and larger
Additional Legacy Literature
ClimateMaster offers a wide range of unit controllers that provide basic operation, advanced diagnostics/troubleshooting, and connection to building management systems. These are paired with exclusive service tools that provide technicians and users with a real-time interface to the water-source heat pump, either remotely or at the unit.
These products, combined, provide a wide range of application flexibility, integrated with ease-of-use technology that sets ClimateMaster systems and products apart from the competition.
CXM2
Features:
Literature:
DXM2.6
Features:
Literature:
Refrigerant Detection System (RDS)
Features:
Literature:
ClimaLink Edge
Features:
Literature:
MPC Multi-Protocol DDC
Features:
Literature:
Wireless Service Tool
(WST)
Features:
Literature:
Advanced Refrigerant Control
Features:
Literature:
Equipment Touch Service Tool (EQT)
Features:
Literature:
Additional Literature
Legacy Controls
DXM
Literature:
DXM2
Literature:
DXM2.5
Features:
Literature:
CXM
